FAQ.

Yes, and often better than expected. Glass keeps light moving through the room, makes the space feel larger, and adds a cleaner architectural finish than a solid wall. The slim aluminium frame stays visually quiet, so it supports the space instead of taking over.

Usually the opposite. Opaque walls stop light and shorten the sightline, so the room can feel smaller. A glass partition keeps the full depth of the space visible, which often makes compact rooms feel more open.

Yes. Glass partitions can work in older and contemporary buildings. The frame finish can be matched to existing windows, doors, or interior metalwork, and surface-mounted channels can often avoid major building work.

Start with how often the space needs to open. If it will stay closed most of the time, fixed panels are simpler and usually more economical. If you need to open it for meetings, gatherings, or flexible use, a sliding system may justify the extra cost.

Yes. The team can share completed work similar to your space, show profile and glass samples, and discuss options during a site survey. You should understand the look and direction before placing an order.

A correctly installed glass partition should last like other permanent fixtures in the building. The aluminium frame will not rust, toughened glass is impact resistant, and serviceable parts such as hinges or sliding rollers can be maintained later.

The frame can be anodised or powder coated. Anodising hardens the aluminium surface, while powder coating is baked on. Both finishes are made for long-term use when specified and maintained correctly.

Yes. BE-SLIM uses toughened safety glass, which is much stronger than regular glass. Normal office and home contact should not damage it, though any glass can be damaged by a severe intentional impact.

Minor surface scratches are uncommon in normal use. If a pane is badly scratched or damaged, individual glass panels can be replaced without disturbing the full partition system.

The floor channel is low profile, usually around one centimetre or less. Most people stop noticing it quickly. If a fully level floor is required, that should be discussed during planning with the architect or site team.

Frosted glass blocks direct sightlines. You may see soft shapes or movement, especially if someone stands very close to the glass, but details are not clear at normal room distance.

Privacy depends on the full specification. Laminated glass, acoustic perimeter seals, and a properly fitted door with a drop seal can make speech difficult to understand outside the cabin. The exact result depends on site conditions and the selected system.

Yes. Common options include frosting up to seated height, curtains or blinds beside the glass, or switchable smart glass for projects that can support the higher cost.

Only if you choose a fully clear setup. Clear glass gives maximum transparency. Frosted or fluted glass softens visibility and creates a more private cabin while still keeping light in the space.

Usually yes at the start. Glass costs more because the material, hardware, and installation are more specialised. The benefit is a more durable, brighter, and higher-value finish that does not make the space feel closed in.

The installation is a dry process with little dust compared with wet civil work. Many single cabins can be installed in a day or two, and office work can usually be planned around your schedule.

The system is designed to be serviced. Doors can be adjusted, rollers and seals can be replaced, and individual glass panels can be changed if required. Warranty support applies as per the written warranty terms.

No. The usual process is an advance payment to start material and production work, with the balance paid after installation or as agreed for larger projects.

After order approval, material production usually takes one to two weeks, followed by installation scheduling. Many standard cabin projects complete in roughly two to three weeks from order approval, depending on site readiness and schedule.

Very little. High-touch areas can be wiped with a microfiber cloth and regular glass cleaner every few days, with a broader clean around once a week. Sliding bottom tracks should be vacuumed occasionally.

Clear glass shows fingerprints most around handles and high-touch areas. Frosted and fluted glass show them less. A quick cloth wipe usually keeps the surface clean.

In many cases, yes. Surface-mounted systems can be dismantled and reinstalled elsewhere, though the old position may need small repairs such as filling screw holes.

Additional panels can often be planned against the existing system. It is usually easier and more economical than starting again, but the exact approach depends on the installed layout.

You can review the aluminium profile system, glass specification, sample finish, and installation process before final approval. The team installs to a defined site process and supplies written warranty terms.

Yes. You do not need to know technical terms. Share what the space needs to do, and the team can translate that into a suitable system, glass type, layout, and finish.

That is fine. A quote and site discussion help clarify scope and cost. If you choose to pause, revise, or take a different direction, there is no obligation to proceed until you approve the order.

BE-SLIM is backed by Birkan Engineering, a manufacturing company with experience in aluminium and glass systems. You work with one team from first discussion to installation handover.